LASERTEC 30 DUAL SLM

Additive Manufacturing by selective laser melting (SLM)

Build volume X
300 mm
Build volume Y
300 mm
Build volume Z
300 mm
Min. Layer thickness
20 µm
Min. Focus diameter
50 µm
Laser power standard
600 W
Control & software alternatives
CELOS/RDesigner
Highlights

LASERTEC 30 DUAL SLM

Additive Manufacturing by selective laser melting (SLM) in powder bed

  • Highly complex components with function integration
  • Internal close-contoured cooling channels
  • Weight optimisation due to lattice and honeycomb structures as well as topology-optimised components
  • Simultaneous build-up of different designs
  • Functional prototypes made of series materials 

Additive Manufacturing with a 300 x 300 x 300 mm (X / Y / Z) building volume

  • 80% more productivity by new dual laser system for build rates of up to 90 cm3 / h - available as single-laser (600 W / 1,000 W) or dual-laser (2x 600 W / 2x 1,000 W)
  • High-precision optic module with dynamically adjustable focus diameter (50 µm to 300 µm), full overlap of scan fields and active cooling
  • Permanent filter system for filter lifetimes > 3,000 h and maximum work safety due to automatic passivation of metal dusts
  • Open system: Individual adjustment of all machine settings and process parameters as well as unrestricted selection of the material supplier
  • End-to-end competence with integral process understanding from drawing to finished part: DMG MORI Process Chains for pre- and post-processing of additively built parts

rePLUG – The powder module for fast material change

  • Automated powder handling: Integrated powder-recycling for maximum efficiency and highest work-safety due to closed material cycle 
  • One material per rePLUG – Any expansion of the material range due to modular changing system
  • Contamination-free change between different materials in <2 hours
  • High process autonomy due to the powerful duo-filter system (filter change without process interruption, only LASERTEC 12 SLM / LASERTEC 30 SLM 2nd Gen.) 
  • Optional: rePLUG RESEARCH The additional powder module, especially developed for the material and process parameter development on the series system

LASERTEC SLM: Additive Manufacturing

Application Examples
Control & Software

NEW: OPTOMET - First time right 
Software for Parameter Optimization in powder bed 

  • 70% shorter material development cycles: parameter development for new and existing materials within minutes instead of days
  • Prediction of mechanical properties for selected materials
  • Better after every print job - "Machine learning" with integrated database
  • rePLUG reSEARCH and OPTOMET - The combination for material development 

CELOS: Consistent software solution from CAM programming up to machine control

  • Intuitive machine operation due to touchscreen and APP-based control
  • RDesigner: CAM Programming directly on the machine control
  • HEAT-Calculation: Patented advance calculation of mass distribution and automatical adjustment of all laser parameters for top component quality
  • Monitoring tools: Camera-based process monitoring of the build-up and coating quality

OPTOMET - First time right

Service & Training
DMQP Powder Cycle

We focus on open powder selection on the one hand and a qualified as well as integrated powder cycle on the other hand in the area of our LASERTEC SLM line.

We provide our customers with a wide powder portfolio which is finally validated in a LASERTEC SLM machine on top of the quality requirements that are already very demanding.


Downloads & Technical Data
Technical Data
Build volume X
300 mm
Build volume Y
300 mm
Build volume Z
300 mm
Min. Layer thickness
20 µm
Max. Layer thickness
100 µm
Min. Focus diameter
50 µm
Max. Focus diameter
300 µm
Laser power standard
600 W
Laser power optional
1,000 W
Inert gas
Argon
Inert gas consumption
150 l/h