Ergonomic

• Ingenious working area for machining clamping towers and 5-axis components on one machine
• Ergonomic cab for easy access to the work area and easy set-up of components
• Small footprint (13 m²) for high area productivity and slim design (2.6 m) for easy linking

Precise

• One-piece, inherently rigid cast iron machine bed with 3-point support for maximum rigidity (also available with HSK-A100) and highest precision
• Thermosymmetrical design with extensive cooling measures for maximum long-term accuracy (up to 5 µm)
• Maximum process reliability through horizontal machining for ideal chip and heat dissipation

Versatile

• 5-axis capability for maximum flexibility thanks to swivel rotary table with bearings on both sides for components up to 600 kg
• Ingenious working area for machining clamping towers and 5-axis components on one machine
• Mill-turn variant for complete machining with up to 1,200 rpm
• Extensive selection of flexible automation solutions thanks to standardized interface

Stiff monoBLOCK concept

• monoBLOCK – Maximum stability from one casting
• Also available with HSK-A100 tool holder for tools up to 280 mm diameter and 22 kg
• Highest availability due to reinforced mass production technology and optimum maintenance access
• Proven division of round and linear axes for easy to understand 5-axis kinematics.
• Clamping of the swivelling rotary table

Patented swivel-rotary table with perfect accessibility - Your guaranteed benefit for complex manufacturing

• Complete machining of complex parts thanks to 5-axis technology
• Rigid table thanks to FEM-optimized design for machining of heavy parts
• Thermal compensation for highest quality production processes

Increase your efficiency and productivity with the CMX U series

• Highest precision thanks to direct measuring system in standard
• Rapid traverse 30 m/min in all linear axes to reduce non cutting time
• 30-pocket tool magazine in standard with quick tool change within 2.7 s 
• Highly-dynamic In-Line spindle of 12,000 rpm with power 13 kW and 83 Nm (40% DC)

The best choice of 3D controls - with SIEMENS or HEIDENHAIN

• 19" DMG MORI SLIMline multi-touch control panel and SIEMENS for intuitive use and easy operation
• 19" DMG MORI SLIMline multi-touch control panel and HEIDENHAIN for easy and efficient programming
• DMG MORI SMARTkey: Personalized with 8 GB additional storage

NEW: inlineMASTER spindle

• 36 months warranty without hourly limitation!
• Improved cutting performance due to 53 % higher spindle power and 45 % higher torque with the 15.000 min−1 inlineMASTER (20 kW, 121 Nm with 40 % ED)
• BIG PLUS^®-interface for longer tool life

NEW: IoTconnector for digitized and connected production processes

• DMG MORI NETservice and MESSENGER preinstalled
• Specially preconfigured for your machine prior to delivery
• Integrated firewall with automatic updates guarantees maximum protection 

Patented swivel-rotary table with perfect accessibility - Your guaranteed benefit for complex manufacturing

• Complete machining of complex parts thanks to 5-axis technology
• Rigid table thanks to FEM-optimized design for machining of heavy parts
• Thermal compensation for highest quality production processes

Increase your efficiency and productivity with the CMX U series

• Highest precision thanks to direct measuring system in standard
• Rapid traverse 30 m/min in all linear axes to reduce non cutting time
• 30-pocket tool magazine in standard with quick tool change within 2.7 s 
• Highly-dynamic In-Line spindle of 12,000 rpm with power 13 kW and 83 Nm (40% DC)

The best choice of 3D controls - with SIEMENS or HEIDENHAIN

• 19" DMG MORI SLIMline multi-touch control panel and SIEMENS for intuitive use and easy operation
• 19" DMG MORI SLIMline multi-touch control panel and HEIDENHAIN for easy and efficient programming
• DMG MORI SMARTkey: Personalized with 8 GB additional storage

NEW: inlineMASTER spindle

• 36 months warranty without hourly limitation!
• Improved cutting performance due to 53 % higher spindle power and 45 % higher torque with the 15.000 min−1 inlineMASTER (20 kW, 121 Nm with 40 % ED)
• BIG PLUS^®-interface for longer tool life

NEW: IoTconnector for digitized and connected production processes

• DMG MORI NETservice and MESSENGER preinstalled
• Specially preconfigured for your machine prior to delivery
• Integrated firewall with automatic updates guarantees maximum protection 

5-Axis Machining with up to 20,000 rpm

• speedMASTER 15,000 rpm with 21kW and 111Nm in basic version 
• speedMASTER 15,000 rpm with 46kW and 200Nm optionally available
• speedMASTER 20,000 rpm with 35kW and 130Nm optionally available

Swivel Rotary Table for 5-Axes Simultaneous Machining

• Table load up to 300 kg
• Swivel area of the B-axis -35°/+ 110°  for highest flexibility
• Cooled table bearings for highest precision

Tool magazine with 30 pockets in basic version

• Loading of tools from the front even during machining
• Excellent visibility and accessibility
• 60 or 120 pockets optionally available

5-Axes Simultaneous Machining with proven Swivel Rotary Table

• Swivel range of the B-axis -5/ +110°
• Table load up to 250 kg
• Cooling of table unit table bearings and drives

Mill-Turn Operation

• Speed of the C-axis up to bis 1,200 rpm
• Motorspindle with 18,000 rpm , 130 Nm and HSK A63

Spindles

• speedMASTER 20,000 rpm in standard version
• speedMASTER 15,000 rpm with 200 Nm (option)
• Motorspindle 24,000 rpm (option)

5-Axes Simultaneous Machining with proven Swivel Rotary Table

• Swivel range of the B-axis -5/ +110°
• Table load up to 400 kg
• Cooling of table unit table bearings and drives

Mill-Turn Operation

• Speed of the C-axis up to bis 1,200 rpm
• Motorspindle with 18,000 rpm , 130 Nm and HSK A63

Spindles

• speedMASTER 20,000 rpm in standard version
• speedMASTER 15,000 rpm with 200 Nm (option)
• Motorspindle 24,000 rpm (option)

ULTRASONIC technology integration - reduced process forces for higher productivity

• Technology integration via HSK-A63 interface for ultrasonic superimposition of the tool rotation with amplitudes up to 15 µm
• Process forces reduced by up to 50% through ULTRASONIC enable, depending on requirements: higher feed rates, improved surface quality up to Ra <0.1 µm, longer tool life
• Specific coolant treatment systems with centrifuges, optimized for the ULTRASONIC processing of Advanced Materials

ULTRASONIC 3^rd Generation - Optimal process control through intelligent controls

• Constant amplitude in the process to ensure reproducibility
• Automatic detection of the working frequency, significantly improved hardware for signal acquisition
• Frequency tracking and simultaneous power control in real time for optimal process stability
• Ensuring the ULTRASONIC advantages even with non-optimal tools
• Fully compatible with 2^nd generation ULTRASONIC actuator

Ergonomic

• Large door opening of 1,500 and unique access to the working area, most compact machine with a footprint of just 12 m²
• Unrestricted crane loading of up to 1,500 kg
• Quick and easy to set up thanks to it´s three-point support

Precise

• Comprehensive cooling measures, high-performance coolant unit and multi-sensor compensation as standard
• From 5 µm positioning accuracy in standard 
• Stiff construction with high static masses and balanced moving parts

Versatile

• Several table solutions from the 5 axes machining with up to 1,500 kg or complete machining with milling and turning with up to 2,050 Nm
• Widest spindle range on the market with up to 30,000 rpm or with up to 430 Nm
• Machine integrated tool magazines with up to 180 pockets

Stiff monoBLOCK concept

• monoBLOCK – Maximum stability from one casting
• One-piece column with large, stable slideways, 55 mm roller guideways in all axes
• Maximum stability thanks to large ball screws in all axes ø 50 / 50 / 50
• FEM optimisation of all components
• Clamping of the swivelling rotary table

ULTRASONIC technology integration - reduced process forces for higher productivity

• Technology integration via HSK-A63 interface for ultrasonic superimposition of the tool rotation with amplitudes up to 15 µm
• Process forces reduced by up to 50% through ULTRASONIC enable, depending on requirements: higher feed rates, improved surface quality up to Ra <0.1 µm, longer tool life
• Specific coolant treatment systems with centrifuges, optimized for the ULTRASONIC processing of Advanced Materials

ULTRASONIC 3^rd Generation - Optimal process control through intelligent controls

• Constant amplitude in the process to ensure reproducibility
• Automatic detection of the working frequency, significantly improved hardware for signal acquisition
• Frequency tracking and simultaneous power control in real time for optimal process stability
• Ensuring the ULTRASONIC advantages even with non-optimal tools
• Fully compatible with 2^nd generation ULTRASONIC actuator

5-Axes Simultaneous Machining with proven Swivel Rotary Table

• Swivel range of the B-axis -5/ +110°
• Table load up to 250 kg
• Cooling of table unit table bearings and drives

Mill-Turn Operation

• Speed of the C-axis up to bis 1,200 rpm
• Motorspindle with 18,000 rpm , 130 Nm and HSK A63

Spindles

• speedMASTER 20,000 rpm in standard version
• speedMASTER 15,000 rpm with 200 Nm (option)
• Motorspindle 24,000 rpm (option)

ULTRASONIC technology integration - reduced process forces for higher productivity

• Technology integration via HSK-A63 / HSK-A100 interface for ultrasonic superimposition of the tool rotation with amplitudes up to 15 µm
• Process forces reduced by up to 50% through ULTRASONIC enable, depending on requirements: higher feed rates, improved surface quality up to Ra <0.1 µm, longer tool life
• Specific coolant treatment systems with centrifuges, optimized for the ULTRASONIC processing of Advanced Materials

ULTRASONIC 3^rd Generation - Optimal process control through intelligent controls

• Constant amplitude in the process to ensure reproducibility
• Automatic detection of the working frequency, significantly improved hardware for signal acquisition
• Frequency tracking and simultaneous power control in real time for optimal process stability
• Ensuring the ULTRASONIC advantages even with non-optimal tools
• Fully compatible with 2^nd generation ULTRASONIC actuator

5-Axes Simultaneous Machining with proven Swivel Rotary Table

• Swivel range of the B-axis -5/ +110°
• Table load up to 400 kg
• Cooling of table unit table bearings and drives

Mill-Turn Operation

• Speed of the C-axis up to bis 1,200 rpm
• Motorspindle with 18,000 rpm , 130 Nm and HSK A63

Spindles

• speedMASTER 20,000 rpm in standard version
• speedMASTER 15,000 rpm with 200 Nm (option)
• Motorspindle 24,000 rpm (option)

Versatile

• Several table solutions from the 5-axis machining with up to 1,000 kg or complete machining with milling and turning with up to 1,000 Nm
• Widest spindle range on the market with up to 30,000 rpm or with up to 200 Nm
• Machine-integrated tool magazines with up to 240 pockets

Stiff monoBLOCK concept

• monoBLOCK – Maximum stability from one casting
• One-piece column with large, stable slideways, 45 mm roller guideways in all axes
• Maximum stability thanks to large ball screws in all axes ø 40 / 50 / 40 mm
• FEM optimization of all components
• Clamping of the swivelling rotary table

Stiff monoBLOCK concept

• monoBLOCK – Maximum stability from one casting
• One-piece column with large, stable slideways, 45 mm roller guideways in all axes
• Maximum stability thanks to large ball screws in all axes ø 40 / 50 / 40 mm
• FEM optimization of all components
• Clamping of the swivelling rotary table